Ferro Liquid Display, or Ferro-electric Liquid Display (FLD) or Ferro Fluid Display (FFD), is a display technology based on the ferro electric properties of certain liquids. Not all such fluids are crystal but they are generically referred to as Ferro Liquid Crystal Displays (FLCD).
The dot pitch of such displays can be as low as 10 µm giving a very dense high resolution display on a small area. These might find applications in 3D displays and head mounted displays (HMD) where typical LCDs have failed to provide anything better than a 640x480 (RGB pixel) resolution on a sq.cm display area.
Properties and uses
Very thin layer (less than 2 µm thick) can help produce a 90° polarization twist.
High density displays with small display areas can be produced.
Display TECH claims that a stamp sized FLCD can drive resolutions needed for 50 inch screen
Switching time is less than 100 µs
High frame rate video displays are possible.
Magnetic polarization effect is bistable.
Can be used for low frame rate displays that can run on very low power
This property can help build display with non-volatile memory with the advantage that the memory can be changed easily.
Viewing angle is greater than 120°
This makes it suitable for commercial TV applications.
Some commercial products do seem to utilize FLCD
High switching allows building optical switchers and shutters in printer heads
The peculiar way that
an inchworm inches along a surface may not be fast compared to using
legs, wings, or wheels, but it does have advantages when it comes to
maneuvering in small spaces. This is one of the reasons why researchers
have designed and built a soft, worm-like robot that moves with a
typical inchworm gait, pulling its body up and extending it forward to
navigate its environment. The robots could one day be used in rescue and
reconnaissance missions in places that are inaccessible to humans or
larger robots.
The peculiar way that an inchworm inches along a surface may not be fast
compared to using legs, wings, or wheels, but it does have advantages
when it comes to maneuvering in small spaces. This is one of the reasons
why researchers have designed and built a soft, worm-like robot that
moves with a typical inchworm gait, pulling its body up and extending it
forward to navigate its environment. The robots could one day be used
in rescue and reconnaissance missions in places that are inaccessible to
humans or largerrobots.
The researchers, Wei Wang, et al., at
Seoul National University in South Korea, have published their paper on the
inchworm-inspired robot in a recent issue of Bioinspiration &
Biomimetics.
In nature, the inchworm is the larvae
phase of the geometer moth and measures about an inch or two long. The small
green worm has two or three legs near its front, and two or three
foot-like structures called "prolegs" at its rear end. Although they
don't have bones, inchworms have complex muscle systems that allow them to
perform a variety of body movements, including standing up
vertically on their back prolegs.
To mimic the inchworm, the researchers
used the soft, highly flexible silicone material PDMS for the robot's body. The
researchers built an inchworm mold using a 3D printer, and then poured PDMS
solution into the mold. Then they glued small pieces of polyimide film to make
feet at the front and rear ends. To play the role of muscle fibers, the
researchers used eight longitudinal shape memory alloy (SMA) wires that extend
throughout the inchworm robot's body.
By actuating the SMA wires with
electric currents, the researchers could cause the inchworm robot's body to
move with a natural inchworm gait. Actuating the SMA wires symmetrically causes
the robot's body to contract symmetrically, resulting in linear motion.
Asymmetrical actuation results in asymmetric deformation and a turning
locomotion using one foot as an anchor. In the inchworm gait, the feet must
continually change from being used as anchors to sliding in order to generate
the push-pull motion. The researchers used alternating low-friction and high-friction
foot segments to replicate these foot changes.
Tests showed that the inchworm robot
achieves a stride length of 54 mm (about 2 inches), which is about one-third of
its body length, at a speed of about 3.6 mm/s. Turning is slower and more
complicated, requiring 21 strides to complete a 90-degree turn. Still, this
performance marks an improvement, both in stride length and turning angle,
compared to previous similar robots.
The researchers, Wei Wang, et al., at Seoul National
University in South Korea, h
Since the dawn of electronics, we've
had only three types of circuit components--resistors, inductors, and
capacitors. But in 1971, UC Berkeley researcher Leon Chua theorized the
possibility of a fourth type of component, one that would be able to
measure the flow of electric current: the memristor. Now, just 37 years
later, Hewlett-Packard has built one.
What is it? As its name implies, the memristor can
"remember" how much current has passed through it. And by alternating
the amount of current that passes through it, a memristor can also
become a one-element circuit component with unique properties. Most
notably, it can save its electronic state even when the current is
turned off, making it a great candidate to replace today's flash memory.
Memristors will theoretically be cheaper and far faster than flash
memory, and allow far greater memory densities. They could also replace
RAM chips as we know them, so that, after you turn off your computer, it
will remember exactly what it was doing when you turn it back on, and
return to work instantly. This lowering of cost and consolidating of
components may lead to affordable, solid-state computers that fit in
your pocket and run many times faster than today's PCs.
Someday the memristor could spawn a whole new type of computer,
thanks to its ability to remember a range of electrical states rather
than the simplistic "on" and "off" states that today's digital
processors recognize. By working with a dynamic range of data states in
an analog mode, memristor-based computers could be capable of far more
complex tasks than just shuttling ones and zeroes around